Digital workflow for aligner treatment
Digital workflow for aligner treatment
WORKFLOW
The materials used for the fabrication of your In-Office Aligners
MEDIT i700 wireless
Ref : 999.1101
Unlike most scanners on the market, Medit i700 can be connected directly to the PC via a power cable, without the need for a power hub or additional cables. This new Medit i700 feature enhances mobility and maintenance.
Wider scanning area
Automatic calibration
the automatic tool
Small tip Reversible tips
Rendering quality
colors multiplied by 4
Remote control mode
Light and balanced
For use in
stable and comfortable
Disinfection
Battery Scan up to
30 cases with 1 battery
Category
Medit i700 wireless
Scanning technology
- Acquisition speed
- Imaging technology
- Light source
- Anti-cure system
- Up to 70 frames per second
- 3D motion video technology / 3D color continuous capture
- LED
- Adaptive
Precision
- Full arch
- 10.9 µm + – 0.98****
- 10.9 µm +- 0.98
Handpiece
- Dimensions
- Weight
- 313 x 44 x 47.4 mm
- 328 g includes battery weight and tip (Includes battery, tip)
Nozzle
- Nozzle size
- Mirror angulation
- Scanning area
- Autoclavable
- Reversible tip
- 22.2 x 17.1 mm
- 45-degree angle / Easy to scan the area /distal to the molars)
- 15 x 13 mm
- Jusqu’à 150 cycles / Up to 150 times
- Yes
Advanced features
- Remote control
- UV-C LED disinfection
- Yes
- Yes
Connectivity
- Cable length
- Type
- Jusqu’à 150 cycles / Up to 150 times
- USB 3.1 Gen1 (Wireless Hub)
MEDIT i700
Ref : 999.1100
Unlike most scanners on the market, Medit i700 can be connected directly to the PC via a power cable, without the need for a power hub or additional cables. This new Medit i700 feature enhances mobility and maintenance.
Accuracy of 11 μm for
the full arch
Rendering quality
colors multiplied by 4
Small tip Reversible tips
Lightweight
Remote control mode
Super fast
Disinfection
Detachable cable
Category
Medit i700
Scanning technology
- Acquisition speed
- Imaging technology
- Light source
- Anti-cure system
- Up to 70 frames per second
- 3D motion video technology / 3D color continuous capture
- LED
- Adaptive
Precision
- Full arch
- 10.9 µm + – 0.98****
Handpiece
- Dimensions
- Weight
- 248 x 44 x 47.4 mm
- 245g
Nozzle
- Nozzle size
- Mirror angulation
- Scanning area
- Autoclavable
- Reversible tip
- 22.2 x 15.9 mm
- 45-degree angle / Facilitates scanning of molar / distal molar region
- 15 x 13 mm
- Up to 100 cycles / Autoclavable 121°C 30 mn / Autoclave 134°C 4 mn
- Yes
Advanced features
- Remote control
- UV-C LED disinfection
- Yes
- Yes
Connectivity
- Cable length
- Type
- 2 m / wireless handpiece, 2.5 m (optional)
- USB 3.1 Gen 1 (type C)
AORAL SCAN 3D SHINING
Ref : 999.1070
Aoralscan
Scan speed 15 fps
Operating temperature 10°C – 40°C
Output data STL, OBJ
Recommended computer configuration
i7-7700 processor or higher
RAM 16 GB or more
NVIDIA GeForce GTX 1060 graphics card -GB DDR or more
Windows 10 64 bit operating system
Interface /I/O USB 3.0 ports
Power supply DC12V 1.67A
Accuracy of 40 μm for
the full arch
Lightweight
Remote control mode
Disinfection
3D PRINTER SPRINTRAY PRO S95
Ref: 999.2020
3D printing in dentistry is more than just a new technology; it can lower your costs, improve your flexibility and expand the scope of your patient care. To make the most of this potential, discover the Sprintray Pro 3D printer.
Easy for everyone
The design of the Pro S
facilitates learning and
print delegation
3D dental. The software
and equipment
self-monitoring systems complement each other
for a total experience
optimal.
Incredible throughput
Print speeds
and large surface area
printers make
Pro S the optimum choice
whether you are a firm
high-volume orthodontics
or a practice just starting out.
High precision
Improvements to
factory calibration and
new projector lens
in glass improve
precision and repeatability.
Your patients will be
delighted with the precision of
adjustment.
Advanced tank
Automatic control of
tank temperature
and tray. Create a
better adhesion of
models Advanced tracking
with field technology
the nearby Pro S
automatically track
the lifetime of each
resin tank.
ACCUFAB L4D
Ref: 999.1080
The AccuFab-L4D’s high-fidelity print results provide an extraordinary digital dentistry workflow, from intraoral scanning to rapid 3D printing
Maximum precision
Printing plate dimensions: 192x 120 x 180
Machine dimensions: 360 x 360 x 530 mm
Speed 50 mm Number of heights per hour
Number of models per tray 6 flat
Compatible materials, Proprietary resins, Compatible materials
Machine weight: 19 kg
PRO WASH AND DRY
Ref: 999.1077
Automated two-stage washing system designed to deliver the speed, cleanliness and ease of use required for modern 3D printing.
RAPID
Pro Wash/Dry uses a mechanical jet to rapidly deliver IPA to printed parts. This unique method provides excellent agitation, reducing wash time while offering improved cleaning power.
OWN
Thanks to a suite of automatic functions, the only time you need to touch the IPA is when you’re pouring it into the tanks. Automatic pumps recycle the alcohol, while quick-connect hoses evacuate it.
EASY
Pro Wash/Dry has been designed with input from the dental community to deliver a superior wash experience.
PRO CURE 2
Ref: 999.2022
ProCure 2 is incredibly fast and opens up new possibilities for your entire 3D printing workflow. Using the patented Light Motion Drive, it delivers exceptional light power and instant warmth to your parts, creating new treatment possibilities during an appointment. By reducing curing time to 5 minutes or less, ProCure 2 can shorten your in-office 3D printing workflow by up to 60 minutes.
Faster
Polymerize numerous parts in 2 minutes with the UVA light module.
High-performance
Thanks to its special post-polymerization mechanism, ProCure 2 can fully photo-polymerize printed parts in just a few minutes, using both light and heat to achieve optimum mechanical properties.
Immediate heating
As ProCure 2 emits concentrated light at 385 nm, optimum heat is applied to each printed part, considerably reducing total post-cure time.
Chamber sweeping
ProCure 2’s light system scans the curing chamber to ensure that each part is cured evenly and thoroughly.
FabCure 2 Shining 3D UV chamber
Ref: 999.2032
The FabCure 2 light-curing unit is a standard post-curing tool for 3D printers. With FabCure 2, each resin curing profile is finely tuned to bring the part to its optimum performance using precise heat and light. The FabCure 2 precisely defines the post-processing stages of the printed object to guarantee high precision and optimal material peformances, while automating the process.
The treatment software DELTAFACE
Ref: 999.L1001
ERKOPRESS CI-MOTION THERMOFORMER
Ref: 999.2002
Pressure unit with automated thermoforming process for the complete dental thermoforming technique. Erkopress ci motion with integrated, stand-alone compressed air production.
Technical data :
♦ H 32cm/L35 cm/P 43 cm ♦ Weight : 21.3 Kg ♦ Working pressure : bis 6 bar ♦ Reserve pressure 7 bar
♦ Operating voltage ~220 – 240 (100, 110 -120) Volt, 50 – 60 Hertz ♦ Power supply: max. 440 Watt ♦ Noise level < 70 dB(A)
Thermoforming machine BIOSTAR 230V Scheu-Dental
Ref: ELE.3001.1
Universal with scanner. All parameters such as temperature, heat-up and cool-down times are transmitted directly to the device by reading the sheet’s barcode or entering the code. The 3.2″ color LCD display shows the various thermoforming stages.
The software provides additional information on the scanned thermoforming plate, such as indications and a library with illustrated instructions for use. A USB interface enables updates. Thanks to the rapid heating of the thermally controlled medium-wave infrared heater, thermoforming processes are fast and safe.
Technical specifications :
52.0 x 44.0 x 24.0 cm; 230 V, 50/60 Hz; 750 W; operating pressure 0.5-6.0 bar; 3.2″ LCD, resolution 320 x 240 pixels; used plate ø 125 mm; 14 kg.
Packaging:
Biostar complete with dust cover; power cable; 1,700 g stainless steel granules; plate sample booklet; sample cover for granules and silicone grease.
Speed
The production process is faster, as there is no delay in shipping or third-party processing of aligners.
Savings
Producing aligners in-house is more economical and profitable than buying them from third parties.
Quality control
You can directly supervise the production of aligners and ensure optimum processing quality.
Patient satisfaction
Patients will be more satisfied with their treatment because they know that their practitioner is directly involved in its production, and is able to respond to their questions and concerns more quickly.
Personalization
You can further personalize treatment to suit the specific needs of each patient.
Growing your business
By lowering the cost of your aligners, you increase the acceptance rate of your adult treatments.
IN-OFFICE ADVANTAGES
Our IN-OFFICE solution for the production of transparent orthodontic aligners will allow you to take control of your treatments while controlling costs. With increasing demand for these treatments among adult and adolescent patients, outsourcing manufacturing can be costly and time-consuming for orthodontists. IN-OFFICE production offers a guarantee of quality for your patients and greater independence for your office.
By internalizing the aligners production process, you can improve the speed and efficiency of your treatments, while reducing costs over time. This approach also helps to increase patient acceptance for these treatments. At ORTHOPARTNER DIGITAL, we will support you in implementing an optimized IN-OFFICE aligners design and manufacturing process that will perfectly suit your office and your team.
CONTACT US
Phone
Availability
Monday to Friday 09h-18h
info@orthopartnerdigital.com